FINDING THE GRAIL
A while back, I posted about “grail guns,” items collectors have a particular yen for. Mine was the full-size Smith & Wesson .357 Magnum revolver in the iconic 3.5” barrel configuration. We got lots of good, nostalgic comments from readers about their particular “grails.”
Well, after a lot of false starts, I can quote Hagar the Horrible and happily say, “I got mine!” I just had one of those landmark birthdays with a “0” at the end, and my sweetie and some friends chipped in and got me one from an Internet gun auction source.
Marked with a little bit of honest wear that just gives it more character, this sculpture of finely finished blue steel and well-worn checkered walnut is a five-screw (read: “Old World detail and craftsmanship) revolver whose serial number indicates it was produced in late 1954 or early 1955. In the name of production economy, Smith & Wesson eliminated the upper sideplate screw about a year after this one left the factory, and decided it could do without the one in front of the trigger guard circa 1961-62. Smith & Wesson introduced this gun and its cartridge in 1935, calling both simply “.357 Magnum.” Along about 1957, S&W went with numeric model designations, dubbing this one the Model 27. Thus, earlier specimens such as this one are known to collectors as “pre-27s.”
This one is as tight and functional as the day it left the factory. This deluxe series was always famous for its smooth action, but this one is particularly slick and light of pull, in both double action and single action modes.
As I sit here fondling this long awaited masterpiece of the gunmaker’s art, my significant other sighs and mutters, “Men…they’re so easily satisfied.”
I don’t understand why she says it as if it was a bad thing…
Below, the “birthday gun,” a pre-Model 27 with 3 .5″ barrel. Gorgeous finish has wear that “shows character.”
“5th screw,” below rear sight on sideplate, and “4th screw,” at front of trigger guard, have long been gone from modern Smith & Wessons.
The barrel configuration of this particular model is unique and distinctive.
August 4th, 2008 at 2:02 pm
Congratulations….
Oh…
And BAPPY HIRTHDAY!!!!!!!
August 4th, 2008 at 3:55 pm
That’s a honey of a piece.
I just started getting into handguns about six months ago, purchased my first in May (a 1911), and then the Smith & Wesson bug bit me. I snagged a magnificent nickeled 28-2 from my local pusher, and it bit me hard. I just picked up a new 21-4 (“new classic”) and can’t wait to get it to the range.
A 27 is hopefully in the works next…
There’s just something about the N-frames.
August 4th, 2008 at 10:36 pm
Happy Birthday ! ! ! !
I just started getting back into guns..my first new one is a Taurus 24/7 Pro in .45 to use as a carry pistol.
My wish list is sooo long I dont know what I want next..But seeing yours I am going to have to check into one.
Thanks for showing us!
Don
August 4th, 2008 at 11:52 pm
Happy Bidet, Mas!
August 5th, 2008 at 12:42 am
Happy Birthday Mas!
I’ll raise my glass of Rolling Rock to your health and long life sir.
(LFI1 W/ Bob Smith Idaho 9/95)
Rob In AK
August 5th, 2008 at 1:29 am
Congratulations, Happy Birthday, and I hope this firearm is as much a pleasure for you to shoot as it is pleasing to the eyes
August 5th, 2008 at 1:36 am
Sweet looking gun. Congratulations & happy birthday.
Fred
August 5th, 2008 at 4:10 am
Happy Birthday and CONGRATS!!!
I’ve been looking for one for you, but haven’t found anybody willing to sell. I’ll stop looking now and concentrate on a couple that I want.
Congrats again, I’m really happy for you.
Biker
August 5th, 2008 at 5:22 pm
Mas,
Congratulations on turning 30 (again)!!!
An N-frame and 1911 are a wonderful combination (with a SG and AR, that is).
George P
August 5th, 2008 at 7:27 pm
I’m new to guns so I don’t have a “grail” yet. Congrats on getting yours.
Happy birthday!
August 7th, 2008 at 12:19 am
You sure are a lucky man to have a significant other who is so warm and caring and gets you your “grail” gun. Sounds like a keeper.
August 7th, 2008 at 8:56 am
Viva La Evolucion
August 10th, 2008 at 11:50 pm
I am glad that you found it and Happy Birthday.
August 19th, 2008 at 1:16 am
Personally I consider my Grail gun to be a S&W model 29 with a 6″ barrel. It can do what ever I need it to do.
August 31st, 2008 at 8:04 am
Congrats on your find, Mas, and may you have many more birthdays yet to you credit!
As a long time reader/follower of your work, I have @ least one “holy grail” you may be able to help me locate; hope you don’t mind the inquiry. Originally posted it on rugerforum.com, then pointed to TFL, now here, in hopes of contacting you, as you might help me locate the smith I am looking for. Following is a partial copy of the threads I have started on these other forums:
Many years ago (and this is from memory so details are suspect), IIRC, Massad Ayoob wrote an article in a magazine called(?) The Complete Book Of Magnums (late 80′s early 90′s vintage, I think), about a pistolsmith who was a past Ruger Armorer who had went into business for himself, and did work on the Six series of pistols. I think his name was Chris Peters, and the conversion/work done was called the Lynx. In the article, Mas used this gun in a shooting event (2nd Chance, I believe) Again, memory is suspect, so excuse any errors….
Way back when, I had the magazine, as well as info his shop sent me, from the address in the article, and the idea of a custom gun was beyond my means/interests, other than pictures, and all that paper is lost. But I never forgot about how highly Mas spoke of this fellow, and how much I liked the looks of the work.Can’t recall the name of his shop, but I think it had “Trapper” or “trappers” in the wording. I have tried internet serches to no avail….
Any leads, or paper trails, would be appreciated, as I’d heally like to hunt down that article, too.
Thank you, Sir, in advance for any information you may provide.
August 31st, 2008 at 3:56 pm
Jason, I think the word may have been “Traders” instead of “Trappers.” Maybe Wind River Traders? I’ll have to go back and check. (Trapper Guns, by the way, was another fine gunsmith, Lin Alexiou, up Michigan way. Been out of touch, might still be in business. Hope so.)
Have also been out of touch with Chris Peters, unfortunately. Few can touch him on slicking up a Ruger. Last I knew he had been gunsmithing at Lewis Arms in Bow, NH, but there was talk of him going back to work for Ruger.
Let me touch bases with some folks in NH after the holiday, and if I can get an update on Chris for you, I’ll let you know here.
Best for the holiday weekend,
Mas
September 1st, 2008 at 7:09 am
Thank you for the reply, Sir; very much appreciated!
(Since you’ve seen this, lease disregaurd my post on THR; was “sent” there by others on the net to pose the question…)
Any information would be greatly appreciated. Yes, I know of Alexiou, but I know he is not the fellow I am seeking.
Best wishes to you and your for the holiday as well, and have a good day.
Respectfully,
Jason
September 5th, 2008 at 9:50 pm
So when are ya gonna file off that pesky hammer spur?
September 8th, 2008 at 3:03 pm
Yo, Jason:
Sorry it took so long to get back to you, but I just today got hold of Chris Peters. It turns out he got out of private gunsmithing a while ago when Ruger was smart enough to hire him back. He’s not doing private work at this time, but is thinking about perhaps dabbling in it again by next year. If he does, I’ll announce it here when the time comes.
Thanks for a good excuse to talk with an old friend with whom I’d been out of touch for too long.
Best,
Mas